[Phred]

I want to remove my upholstered seat back spring (front and back) from my 28 phaeton and hopefully reinstall it later, but I am not sure how it is actually held in place. Please let me know if my assumptions are correct and what else I will need to do.

I suspect the seat back spring is upholstered similarly to the bottom cushion and also has a "flap" of material that is tacked to the wood strip and then covered with hidem strip.

Once the flap is carefully detached from the tack rail, how is the back spring cushion removed from the car?

Are the side panels at the driver's side and hips separate items that are installed prior to installing the seat back spring?

Any other tips would also be appreciated.

Thanks in advance.