Re: Manufacturing Mistakes
Hi Jim,
1. Just removed an early manufactured Model A aluminum fan with incorrect taper; hence, it came loose about (3) times -- threw it in the garbage installed a new aluminum fan with correct taper at about 4 a.m. this morning.
2. Before that, at about 3 a.m., just installed a new steering wheel -- had to work back side for about (2) hours to remove material so it would not bottom out & cause friction when turned.
3. One can easily go through at least (2) to (3) Dremel tools during a single Model A restoration in trying to make repro parts fit.
|