The Ford Barn - View Single Post - Changing the steering wheel in a 31 Tudor

Tom Wesenberg · 01-05-2014, 09:54 AM

Remove the tank clamp and the two bolts mounting the steering to the frame. Hopefully this will give you enough drop to remove the light switch rod. You might need a special puller for the steering wheel, as some are stuck very tight. DO NOT hammer on the threads.

01-05-2014, 09:54 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Changing the steering wheel in a 31 Tudor Remove the tank clamp and the two bolts mounting the steering to the frame. Hopefully this will give you enough drop to remove the light switch rod. You might need a special puller for the steering wheel, as some are stuck very tight. DO NOT hammer on the threads.