Quote:
Originally Posted by darrylkmc
bdave_mcc,
To me, it looks as if your photo your Rear Main Babbitt is cracked.
Look at the right side, front side of cap, at the radius where it is flush with the block, both sides appear separated. It looks as if it runs from one side to the other, not parallel but at a arc, looks like pitting at the bottom.
Darryl in Fairbanks
|
Yes it is cracked. I was wondering what problems , if any that will cause. I found the return tube missing, too much crank end play, and the broken bearing. The engine looks pretty fresh from what I can tell. All the babbit looks OK except for the rear cap and it appears to have all new sleeves and pistons.