The Ford Barn - View Single Post

Tom Wesenberg · 08-25-2013, 07:38 AM

I bought a 1928-9 front bumper that was bent in as your's is. I set a short 6 x 6 under the end of each bar and jumped on the middle. After a few jumps I was able to get the center straight again. I had to do each bar seperately.

08-25-2013, 07:38 AM	#9
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: 1930bumper I bought a 1928-9 front bumper that was bent in as your's is. I set a short 6 x 6 under the end of each bar and jumped on the middle. After a few jumps I was able to get the center straight again. I had to do each bar seperately.