Sponsored Links (Register now to hide all advertisements)
both HL and tom are dead on
heat the housing dull red ,and quench it ,you may have to do it a few times
buy the correct 13/32 box end wrench ,(no compromise here)
drill out the bottom from the inside of the bowl,there are two holes to drill out ,as they are at the very bottom ,they usually full of crap
just be careful to drill only the packed in crud
HL comments : Christmas ornaments are not all eazy outs are good for
heres two little hammers I made using them
they are for tapping out dents in my bumper clamps
they are hard to weld as the metal is so hard
but they work perfect
tom