View Single Post
Old 07-15-2013, 01:26 PM   #18
Roger/Sacramento
Senior Member
 
Roger/Sacramento's Avatar
 
Join Date: May 2010
Location: PRINEVILLE, OR.
Posts: 490
Default Re: 1940 Ford Hood Alignment

I built a '40 coupe a few years ago and recently finished a '41 pickup. Both were a lot of work. If I ever do one again I will make everything right with the motor and radiator out. That would allow easy access from inside the cavity. Then take the hood off and install the motor and radiator and return the hood.
__________________
KIM KARDASHIAN ISN'T FLAT, BUT MY MOTOR IS.....

http://s818.photobucket.com/home/roglehr/index
Roger/Sacramento is offline   Reply With Quote