The Ford Barn - View Single Post

Old Redneck · 05-13-2010, 06:04 AM

I use a small flat piece of hard board about one half inch thick with a shop rag wreped aeound it place under the wiper arm and a screw driver to lift off the wiper arm. Be careful that the arm doesn't fly off and scratch the paint.When I work in the assembly plant at Ford that the way we did it.

05-13-2010, 06:04 AM	#7
Old Redneck Senior Member Join Date: May 2010 Location: Waynesburg,Pa. Posts: 1,914	Re: '55 Ford Customline Wiper Arm Removal I use a small flat piece of hard board about one half inch thick with a shop rag wreped aeound it place under the wiper arm and a screw driver to lift off the wiper arm. Be careful that the arm doesn't fly off and scratch the paint.When I work in the assembly plant at Ford that the way we did it.