The Ford Barn - View Single Post

WRA · 12-10-2012, 07:24 AM

I picked up the following parts for my fan mount generator converion, should know more this weekend but initial review shows that the Armature is too short for the fan mounted application Im trying to build. May fit but wont be able to use the nut, just pully pressed on. Parts cost me arount $70 shipped.

1- C1TZ-10005-A ARMATURE
1- C1AZ-10069-A BRUSH SET
1- D6AZ-10175-A FIELD COIL
1- 8BA-10094 FRONT BEARING
1- B6A-10095-A REAR BEARING 1963 1964
1- C3AZ-10050-A Generator Rear End Plate and Brush Assembly

12-10-2012, 07:24 AM	#10
WRA Senior Member Join Date: Sep 2010 Location: Texas Posts: 394	Re: 6V to 12V generator field coils I picked up the following parts for my fan mount generator converion, should know more this weekend but initial review shows that the Armature is too short for the fan mounted application Im trying to build. May fit but wont be able to use the nut, just pully pressed on. Parts cost me arount $70 shipped. 1- C1TZ-10005-A ARMATURE 1- C1AZ-10069-A BRUSH SET 1- D6AZ-10175-A FIELD COIL 1- 8BA-10094 FRONT BEARING 1- B6A-10095-A REAR BEARING 1963 1964 1- C3AZ-10050-A Generator Rear End Plate and Brush Assembly