Sponsored Links (Register now to hide all advertisements)
This time I've got to agree with Vince. I've got model A's both ways and would prefer lighter flywheels in all of them. I run a model B flywheel in my roadster and it out performs the ones with stock heavy model A flywheels. I get faster acceleration, easier gear shifts and less weight has got to be easier on the main bearings. I run other mods like higher compression, two B carbs, warmed up ignition, free flowing exhaust and a Stipe ground cam. My engine is low milage and runs the original Ford balanced rotating assy. It idles good and will chick ah lunk with the spark retarded after a slight warm up. Its got wonderful low end torque. I can let it idle and pop my foot off the clutch pedal and it will take off without choking down. We've never needed to ride the clutch when taking off. I have good hill climbing ability and its got power much like a modern vehicle. This is my experience.