The Ford Barn - View Single Post

paul2748 · 08-14-2012, 07:52 PM

If you have two regular senders (not the double post one used in cars) you can run one gauge by wiring them into a double pole switch (toggle switch works good) and then one wire to the gauge. Flip the switch and you can see the temperature on one side or the other.

08-14-2012, 07:52 PM	#2
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 4,290	Re: Temperature sender: one or two? If you have two regular senders (not the double post one used in cars) you can run one gauge by wiring them into a double pole switch (toggle switch works good) and then one wire to the gauge. Flip the switch and you can see the temperature on one side or the other.