The Ford Barn - View Single Post

J Franklin · 08-13-2012, 02:47 PM

Mike, you don't need to mill the head to know it is flat, just use a metal straight edge and look for gaps. explain locktite on the studs, I don't know what you were trying to accomplish with that.

08-13-2012, 02:47 PM	#2
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 6,370	Re: Milling a Snyder's head Mike, you don't need to mill the head to know it is flat, just use a metal straight edge and look for gaps. explain locktite on the studs, I don't know what you were trying to accomplish with that.