The Ford Barn - View Single Post

wrndln · 07-10-2012, 03:40 PM

What I have is some conveyer belt material with the cording inside it. It is slightly more than 1/8" thick. The original pads on some blocks I have are between 1/8" and 3/16" thick - closer to 3/16" on average. Smashed down they are about 1/8". Some one mentioned that Tractor Supply sells belting for balers that is about 1/8" thick with cording inside the rubber. I would think that would work OK.
Rusty Nelson

07-10-2012, 03:40 PM	#10
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,297	Re: 28/29 front body block pads What I have is some conveyer belt material with the cording inside it. It is slightly more than 1/8" thick. The original pads on some blocks I have are between 1/8" and 3/16" thick - closer to 3/16" on average. Smashed down they are about 1/8". Some one mentioned that Tractor Supply sells belting for balers that is about 1/8" thick with cording inside the rubber. I would think that would work OK. Rusty Nelson