The Ford Barn - View Single Post

Curt Campbell · 05-17-2012, 07:52 PM

I have used a rotisserie to aid in the frame up restoration process, none of those were 1930 cars. In visiting with some local Model A guys, there is some concern expressed that due to the structure of the Model A body, it may not be able to withstand a 90 degree or full turn on a rotisserie. Reasons given are the not-as-solid subframe of the A compared to a Camaro or other type car. It would not have the frame installed on it when on the rotisserie.

I am about to begin another project, my 31 Tudor Deluxe. Any thoughts or experiences here? Sure don't want to get the body out of whack if it wont withstand the turn. Of course, the door openings would be solidified with a steel tube temporarily welded in place.

Brent...do you use a rotisserie??

THANKS!!! Curt in Iowa

05-17-2012, 07:52 PM	#1
Curt Campbell Senior Member Join Date: May 2010 Location: Ottumwa, IA Posts: 308	Model A Rotisserie Questions I have used a rotisserie to aid in the frame up restoration process, none of those were 1930 cars. In visiting with some local Model A guys, there is some concern expressed that due to the structure of the Model A body, it may not be able to withstand a 90 degree or full turn on a rotisserie. Reasons given are the not-as-solid subframe of the A compared to a Camaro or other type car. It would not have the frame installed on it when on the rotisserie. I am about to begin another project, my 31 Tudor Deluxe. Any thoughts or experiences here? Sure don't want to get the body out of whack if it wont withstand the turn. Of course, the door openings would be solidified with a steel tube temporarily welded in place. Brent...do you use a rotisserie?? THANKS!!! Curt in Iowa