The Ford Barn - View Single Post

62pan · 03-12-2012, 07:20 AM

I need one with the bearing, splines and seal surface in good shape. Too many are bad in this area. I am not interested in the taper end as that will be cut off for a quickchage. PM me if you have one.

03-12-2012, 07:20 AM	#10
62pan Senior Member Join Date: May 2010 Location: Middletown Pa Posts: 397	Re: Drive shaft and tork tube I need one with the bearing, splines and seal surface in good shape. Too many are bad in this area. I am not interested in the taper end as that will be cut off for a quickchage. PM me if you have one.