Quote:
Originally Posted by texas webb
Couldnt get on the hamb this am.Are there any problems adapting a T-5 from an 86 4x4 s-10 to a flathead?Thanx to any replies,Webb.
|
Unless you're going to use one of the torque-tube adapters, you'll have fun adapting the rear of that 4x4 trans to a driveshaft...it bolts to the transfer case with a splined shaft and a seal on the outer end. The flange is flat, round, and large. Talk with Dan Bridges (Crazydaddyo on the HAMB) or Steve Serr for the adapter...it will require frame & torque-tube surgery.