The Ford Barn - View Single Post

fordfixer · 06-28-2010, 02:59 PM

It depends on how much sticks above the block surface. Most model A pistons stick up about 30 thousandts. Unless you have had the block deck considerably lower a nice copper head gasket should do the trick for you.

06-28-2010, 02:59 PM	#2
fordfixer Senior Member Join Date: May 2010 Location: Crete, Illinois Posts: 306	Re: model A head gasket question It depends on how much sticks above the block surface. Most model A pistons stick up about 30 thousandts. Unless you have had the block deck considerably lower a nice copper head gasket should do the trick for you.