[Aerocraft]

For others that need this work done, it is very likely that someone in your local car club, especially an aircraft mechanic, has the equipment that you need. It is rather expensive to buy the gun and set just for four rivits. The rivits do need to be driven while the shank of the rivet is red hot.

It has been my experience that some of the aftermarket parts do not fix perfectly so pay close attention to the fit of the parts before you drive the rivits.

If you are close to the Chicago area, bring them to my shop and I'll install them for free but it does take two people. I do expect that the owner will help.

Gar Williams