The Ford Barn - View Single Post

Bob C · 10-10-2011, 02:45 PM

The point I was trying to make is if you can put a 29/64" drill bit
in the hole then the hole is bigger than the 7/16" outside diameter
of the stud.

Bob

10-10-2011, 02:45 PM	#8
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,360	Re: Drilled out stud holes The point I was trying to make is if you can put a 29/64" drill bit in the hole then the hole is bigger than the 7/16" outside diameter of the stud. Bob