The Ford Barn - View Single Post

mrtexas · 07-27-2011, 06:11 PM

It would be nice if someone else with an E28 would measure the distance between the two bottoms screws! My 29 screws are3 1/4 inches center to center.

Here is from an earlier post that I did not get an answer from someone`!

"I got my micrometer out and measured the distance between the screw holes and low and behold, on the E28 the bottom holes are about 1/8 inch farther apart, just enough difference I can't put the bottom screws in."

07-27-2011, 06:11 PM	#8
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,397	Re: More early AR parts It would be nice if someone else with an E28 would measure the distance between the two bottoms screws! My 29 screws are3 1/4 inches center to center. Here is from an earlier post that I did not get an answer from someone`! "I got my micrometer out and measured the distance between the screw holes and low and behold, on the E28 the bottom holes are about 1/8 inch farther apart, just enough difference I can't put the bottom screws in."