The Ford Barn - View Single Post

Terry,OH · 08-11-2025, 05:54 AM

I also suggest the vacuum gauge. Have you tried to remove the idle mixture screws and check the small passage is clear. Each screw should effect idle if one does not that is the one to check.

08-11-2025, 05:54 AM	#3
Terry,OH Senior Member Join Date: May 2010 Posts: 5,186	Re: Ignition Issues, Crab distributor I also suggest the vacuum gauge. Have you tried to remove the idle mixture screws and check the small passage is clear. Each screw should effect idle if one does not that is the one to check.