The Ford Barn - View Single Post

expavr · 07-29-2025, 10:42 PM

The original knobs on my 40 Tonner are ivory colored. I suspect that all tonners were sold with ivory or beige colored knobs. According to the 1940 Salesman’s Manual there was no option for black colored dash knobs which leads me to think that if they are black they are an after market product. Regarding the fender braces they were bolted to the fender and the frame. No welds at those connecting points.

07-29-2025, 10:42 PM	#5
expavr Senior Member Join Date: May 2010 Location: Hansville, WA Posts: 802	Re: General Questions about 41 3/4 ton The original knobs on my 40 Tonner are ivory colored. I suspect that all tonners were sold with ivory or beige colored knobs. According to the 1940 Salesman’s Manual there was no option for black colored dash knobs which leads me to think that if they are black they are an after market product. Regarding the fender braces they were bolted to the fender and the frame. No welds at those connecting points.