Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Keith True
For whatever reason,the moving pawl has jumped up over the fixed pawl.Not sure how it happened,but there it is.Go to the opposite side of the pivot,towards the drivers foot,and take the pinch bolt out.Slide the lever through the cast pivot until the ratchet pawls clear each other.Turn the moving pawl down to where they will engage,and slide it all back together.Then track down as to whay it happened.I suspect the parking brake was adjusted too loosely,and when somebody pushed their thumb on the button and pulled to release it,the pawl just popped up over the fixed part.Nobody actually did anything to break it.
|
Hi, I am assuming this is what you mean - remove that nut and take that bolt out?
1000076494.jpg
Is there anything else I should be aware of, like anything that should be loose / disengaged before removing that bolt and sliding the lever?