Cleaning out some more of my personal collection. Prices shown do not include shipping. Shipping is to US Address only, and will be by FedEx. If you want a shipping estimate send me you complete name and address and I will get you the shipping price. I have lost too much stuff in the mail so I will not ship that way. All inquiries should be sent to
[email protected].
1) 1 set of pre-cut upholstery panels for 30-31 Roadster Pickup. These are just the hard fiberboard panels that were sold through the major model A dealer’s for years. Sealed in the original shipping box. This set was made by Cartouche $225.00 set Reduced $210.00 SOLD set
2) July 1931 – End of Production Rear Bumper Cross Brace – This is the brace that helps tie the two rear bumper braces together. This is stamped steel and has the extra reinforcing rib stamped into it. They have some light pitting on them but over all very nice and clean. I have two for sale. $125.00 ea Reduced $100.00 ea
3) January 1930 – February 1930 Stamped 3 hole Rear Bumper Cross Brace – Used only for 2 months during production. Very nice condition not banged up or bent little to no pitting but it is painted. From the collection of Dave Frazier in Westminster MD $125.00 Reduced $100.00 ea
4) Early 1930 Tudor or Fodor Sedan Rear bumper brackets & Crossbar. This is a three-piece set. The two rear bumper brackets and the special early 1930. All three pieces are nice clean and in primer. There were restored by Dave Frazier in Westminster MD years ago. I was going to put them on my car but sold the car before I could install them. 3pcs set $395.00 for all three pcs Reduced $405.00 set of 3 pcs
5) 10’ coil of top molding – TOP MOLDING HIDDEN NAIL W/ BOTTOM RIB FOR SIDES AND COUPES - Style R3, 5/8" wide used down the side, around the back and up the other side. This molding has an open seam in the middle and rib on the bottom. For the following: 1930-31 Coupe 45-B; 1929-31 Town Sedan 155-B,D; 1929-31 Fordor Sedan 165-B,D & 1929-31 Fordor Sedan 170AB. Fordor cars needs 2 sets per car. I have 4 of these 10’ rolls. $110.00 per 10’ roll I also have one that is 8’ and that one is $50.00. Reduced 10' $90.00 per roll , 8' 30.00 roll
I will be listing more in the near future as I continue to do some cleaning. Pictures are available upon request. Again, please send all inquiries to Jeff@ Brattons.com these parts have nothing to do with Bratton’s so no sales can be run through the shop. Just parts from my own personal stash.