Re: Adding turn signals to my A. I need help!
Bob suggested soldering. This is OK if done right. The problem is when the solder wicks down the wire making it stiff and a stress point where the solder ends. That is why the crimp connectors, shaped like a tube, are recommended. But, like I said in my earlier post, the right crimping tool must be used.
Glad you got it fixed and that you got a lesson on the use of the multimeter. That meter will help you in many ways in the coming years.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|