[BRENT in 10-uh-C]

At some time either before and/or during the sheetmetal process, we fabricate & install the wood infrastructure into the body. The goal is to have the body wood installed prior to final mock-up being done in the Metal Shop, -and before it goes to the Body Shop for the final time (-between the Sheetmetal repair and the Wood installation, it does go to the Body Shop to have Epoxy primer applied to the sheetmetal behind the areas where the wood will be installed.) We predominantly use Ash and purchase it from the mill in 5/4", 8/4" and 12/4" thicknesses....





Station Wagon...




68C Cabriolet...


Special Coupe...


DeLuxe Delivery...








.
.

.