The Ford Barn - View Single Post

Y-Blockhead · 06-27-2025, 11:33 AM

I made these reinforcement washers for the engine side to spread out the clamping force. On the frame side, I tapped the holes in the frame for bolts (I forget size) and install from the bottom. Makes it a one old man job.

06-27-2025, 11:33 AM	#9
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 6,638	Re: engine side pans attachment I made these reinforcement washers for the engine side to spread out the clamping force. On the frame side, I tapped the holes in the frame for bolts (I forget size) and install from the bottom. Makes it a one old man job.