Quote:
Originally Posted by Ruth
I'll be watching this one. I have always had mixed feelings about using shims.
If the taper between the axle and the hub hold keep it from moving, how does the work with a shim between them? I would think there would be some movement and then only the axle key would be doing the holding?? I don't know.
Axle shims are available from most of the vendors if you go that route. https://www.snydersantiqueauto.com/p...8129&cat=41823 |
I have juice brakes on my A, they put shims on , the shims worked there way in the axle housing, it created a big mess