The Ford Barn - View Single Post

Herb Concord Ca · 06-19-2025, 04:15 PM

Hi I have an indented open cab P/U built in August 31. In your second picture, that diminution is 10 1/4". From the vertical front edge of seat riser to the floorboard wood is 5". Hope this helps. Again, these dimensions are from an open cab.

06-19-2025, 04:15 PM	#2
Herb Concord Ca Senior Member Join Date: May 2010 Location: Concord CA Posts: 755	Re: Late 1931 CCPU Seat Riser Question Hi I have an indented open cab P/U built in August 31. In your second picture, that diminution is 10 1/4". From the vertical front edge of seat riser to the floorboard wood is 5". Hope this helps. Again, these dimensions are from an open cab.