Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Newc
Note 32/34 PU [trucks] use a long 'piano' hinge. Full length rubber seal between hinge and body. Very flat head machine screws about 1/2' long. Nuts go on top of header strip. Take two persons to install usually. One full length hinge. Newc
|
Yes I have 2 of the frames with hinges. Nuts on my cab are cage nuts welded to body. They do look like a bear to install especially after fitted with glass.
I bought a package of 4 screws from ThirdGen that stated for 32-36 closed car windshield to header but I need 6 more. They appear to measure 12-24. Went to my local how store that has a massive collection and didn’t find any 12-24. McMaster only has SS to match.
Guess I will do a test fit of hinge and frame with screw set before I order 4 more from thirdgen.