View Single Post
Old 05-19-2025, 06:11 PM   #4
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 10,159
Default Re: 1932 tall coil distributor

Quote:
Originally Posted by DavidG View Post
It was originally for '32 V8s and for some of the first few '33s. Not commonplace,, but not as rare nor as valuable as once thought. Some parts are available such as inner and outer distributor caps, points, an condenser as they are common with '33-'35 distributors.

In the photos it is missing the fitting for the vacuum line for the vacuum brake, unique to the '32 distributor.

The diameter of the ignition points was increased in '34 and the plate to accommodate the larger points is a worthwhile improvement.

The coil is rebuildable, if required.
petehoovie is offline   Reply With Quote