Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by glennpm
This caught my attention. Try running a wire that goes from the battery to the distributor side of the coil, bypassing the resistor. If that works, wire up a momentary switch that you can toggle while cranking. For normal running the resistor is in play.
Ignition Switch to Coil Resistor; Black with Red 16
(also found as Red with Blue)
Coil Resistor to Ignition Coil; Red and yellow 16
Ignition Coil to Distributor Points. Black 16
Links for your wiring diagram, https://www.fordbarn.com/forum/showp...44&postcount=5 |
