The Ford Barn - View Single Post - 32 coupe speedometer drive gear needs replacing, how.

oldford · 05-02-2025, 05:40 PM

OK as was mentioned. The gear was slick, and my finger was just sliding on top of the teeth. The problem is the turtle. Not the teeth but the hole where the cable attaches too. The hole is worn plus the cable is worn. Put those two problems together and I have a speedometer that does not work. I can not believe I thought the gear drive was stripped. Thanks, everyone was a big help. At least I see the parts that make up the drive.

05-02-2025, 05:40 PM	#11
oldford Senior Member Join Date: Jul 2010 Posts: 211	Re: 32 coupe speedometer drive gear needs replacing, how. OK as was mentioned. The gear was slick, and my finger was just sliding on top of the teeth. The problem is the turtle. Not the teeth but the hole where the cable attaches too. The hole is worn plus the cable is worn. Put those two problems together and I have a speedometer that does not work. I can not believe I thought the gear drive was stripped. Thanks, everyone was a big help. At least I see the parts that make up the drive. Last edited by oldford; 05-02-2025 at 07:45 PM.