04-19-2025, 09:50 AM
|
#17
|
|
Senior Member
Join Date: May 2015
Posts: 10,144
|
Re: Flathead pre-oiler - good, bad and the ugly?
Quote:
Originally Posted by V8 Bob
Ziggster,
You would be better starting off with a clean pressure vessel, like an inexpensive common garden sprayer, vs one containing "crud/rust". Using a filter is a good, but a standard full flow would allow much higher volume, important when pre-oiling.
Pictured is the one I use on my remote-filtered flatheads and BBFE.
|
|
|
|