The Ford Barn - View Single Post

Scotty's 52 F3 · 04-06-2025, 09:29 PM

I cut the nipple down, drilled and tapped it to 1/8" NPT so I could put the stock breather in. I really don't want to run a hose up under the bed. Washer is a crush washer to seal the bolt.
https://cimg2.ibsrv.net/gimg/www.for...0759929f4e.jpg

04-06-2025, 09:29 PM	#91
Scotty's 52 F3 Senior Member Join Date: Dec 2015 Location: Marana, AZ. Posts: 452	Re: 9" rear in a jailbar truck I cut the nipple down, drilled and tapped it to 1/8" NPT so I could put the stock breather in. I really don't want to run a hose up under the bed. Washer is a crush washer to seal the bolt. https://cimg2.ibsrv.net/gimg/www.for...0759929f4e.jpg