The Ford Barn - View Single Post

gdmn852 · 03-30-2025, 10:21 AM

Hello, also check clearance on the inner pulley area to the water pump,sometimes the fan pulley area will rub on water pump , make sure it spins freely, if not you will want to tgrind some stock off the pump.

03-30-2025, 10:21 AM	#12
gdmn852 Senior Member Join Date: Feb 2019 Location: Erie Pa Posts: 961	Re: Engine fan replacement 1930 Model A Hello, also check clearance on the inner pulley area to the water pump,sometimes the fan pulley area will rub on water pump , make sure it spins freely, if not you will want to tgrind some stock off the pump.