Quote:
Originally Posted by flatford8
I sent a motor to Texas last year with Fastenal……don’t know if that’s an option but it went well for me…….if I can offer a suggestion, a couple of 3”x3”or 4”x4”blocks under two bottom edges so a forklift can under it, might not be a bad idea. That way a lift operator would resist the temptation to try and put a lift truck tine thru the handles, if its heavier than they’re expected to lift by hand……….Mark
|
Don't know where the third member is coming from but Fastenal doesn't ship east to west or west to east. I believe the dividing line is the Mississippi River or there abouts. But it's been a while since I checked with Fastenal about shipping so things may have changed.