[BRENT in 10-uh-C]

I obtained the print for the purpose of remaking a smaller diameter wheel. My opinion is a 2" smaller diameter wheel could be made however the costs would likely be more than $1k which most hobbyists would not see as a value.

If someone is creative enough, the original wheel can have the Fordite removed exposing the metal foundation on the end portion of the spokes and the entire rim. Use a roller to form a small diameter ring out of tubing to use as the hand grip area. Weld the tube to the spokes. Use body filler on the spokes and the rim to recreate the shape like the original wheel. Use casting silicone rubber to make the mould. Remove the body filler and remaining Fordite on the wheel and then cast new rubber in the mould to cover the new wheel.