The Ford Barn - View Single Post

Dick M · 03-10-2025, 02:51 PM

Post #5 looks correct to me and that is how I have it configured on my A. It only makes sense that the spring washer would be between the big nut and the steel/rubber washer to hold the nut tight..

03-10-2025, 02:51 PM	#11
Dick M Senior Member Join Date: May 2010 Location: Ukiah, CA Posts: 510	Re: Windshield Hold Open Hardware Post #5 looks correct to me and that is how I have it configured on my A. It only makes sense that the spring washer would be between the big nut and the steel/rubber washer to hold the nut tight..