Re: Burtz vibrations
The tightening of the Float a Motor mounts is critical. Just tighten so that the bolts though the rubber pads are snug. Do not over tighten. The stock motor mounts in the front work better.
A lightened flywheel will produce more torsional vibration than the stock 65 pound flywheel.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|