View Single Post
Old 03-05-2025, 10:44 AM   #3
signsup
Senior Member
 
Join Date: Mar 2017
Posts: 201
Default Re: Blow by from oil fill tube

I know nothing about engines or if there is a draft tube or PCV system already in place on your engine. But, some military vehicles vintage I have worked on have a system as simple as a short rubber hose coming from a short connection on the oil fill tube near the cap to a similar connection at the top of the valve cover. Some have a PVC valve connected from this same oil filler neck to an access to the air filter tube to allow the gases to get burned through the carb. And, I thought the very early engines just had a tube that came out of the block and deposited their wares on the road surface. Can't elieve your 53 doesn't have something already in place. JMO
signsup is offline   Reply With Quote