Quote:
Originally Posted by JayJay
If you are careful, you can get the travel you need by bending the sheet metal of the mirror back to allow the stem to travel farther. Don't try to bend the arm, it will likely break!
As an alternative, consider hinge pin mirrors. I like them much better than the door clamp mirror you show.
|
Thanks for the suggestion. The previous owner had a hinge pin mirror to go with the car, and he aborted putting it in because he didn’t want it mess up the nice paint job.
The restoration was done in the sixties, and fhat hinge pin is likely going to be a demon to remove.
Sent from my iPhone using Tapatalk