The Ford Barn - View Single Post

34 fordor owner · 03-01-2025, 04:34 PM

Only loosing about 1 volt to the resistor now. Ordered a new starter switch should be here Monday and that should fix the not turning over issue. Getting 5.9 volts to the starter switch and hit the button, nothing no voltage or very low at the starter. The starter switch gets very hot to the touch. Will touch back when I get the switch in. Apologies for not being very mechanically inclined!!

03-01-2025, 04:34 PM	#58
34 fordor owner Senior Member Join Date: Jan 2021 Location: Alamance NC Posts: 138	Re: Chasing same issues again any ideas? ‘34 Only loosing about 1 volt to the resistor now. Ordered a new starter switch should be here Monday and that should fix the not turning over issue. Getting 5.9 volts to the starter switch and hit the button, nothing no voltage or very low at the starter. The starter switch gets very hot to the touch. Will touch back when I get the switch in. Apologies for not being very mechanically inclined!!