Re: Care and Feeding of Trico Vacuum Wipers
If the vacuum motors sit for a long while they can become gummed up and corroded. The only solution is to take them apart and rebuild them with new gaskets. If they are still working, spray a light oil or 3-in-one oil where the air goes into the motor and do that while they are operating. Do not use WD-40 as it will evaporate over time.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|