Re: What do you do with your dipper tray in oil pan
You could try gold plating the inside of the oil pan and splash tray.
The rods need oil quickly on start up, so I would advise not drilling the holes in the splash pan for dip lubricated rods. But for a pressure lubricated engine, where the rods are pressure lubricated, the holes in the tray are a good idea.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|