The Ford Barn - View Single Post - 1932 Ford Model B transmission leak fix ideas

hotcoupe · 01-20-2025, 07:18 PM

I have my transmission case at the machine shop now, the front of the counter shaft bore will be counter bored for a 7/8" Welch plug. The countershaft and reverse idler is type "N" Thompson shafting (from memory), measures 0.750", and an "O" ring groove will be machined on the transmission side of the retaining pin at the rear of the transmission.
Tom

01-20-2025, 07:18 PM	#2
hotcoupe Senior Member Join Date: May 2010 Location: imperial,mo Posts: 745	Re: 1932 Ford Model B transmission leak fix ideas I have my transmission case at the machine shop now, the front of the counter shaft bore will be counter bored for a 7/8" Welch plug. The countershaft and reverse idler is type "N" Thompson shafting (from memory), measures 0.750", and an "O" ring groove will be machined on the transmission side of the retaining pin at the rear of the transmission. Tom