Re: Oil filter return line
Quote:
Originally Posted by Jack E/NJ
Probably could whip something up using the hole in the pan for the dipstick tube.
|
I recall the tube is threaded into the cast boss. If it's a pipe thread you could put a close nipple at the boss, then a tee and a shortened dipstick tube. Or punch holes high up on the pan for a 1/8" pipe flange. 4 self tappers and a neoprene fender washer from the drawers in the hardware store for a gasket, or gasket maker in a tube. This may require drilling a conical depression (without going through  ) before punching.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)
|