The Ford Barn - View Single Post - Insufficient Hardness of New Lifters & Cams

GB SISSON · 12-31-2024, 11:04 PM

I don't know much about cam grinding, but I recently used a cam like these that are available at Carpenters. I don't know what a core costs, but at least these are NOS. I used mine straight outa the box, stock grind.

https://redirect.viglink.com/?format...52-noscamshaft

12-31-2024, 11:04 PM	#2
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 5,881	Re: Insufficient Hardness of New Lifters & Cams I don't know much about cam grinding, but I recently used a cam like these that are available at Carpenters. I don't know what a core costs, but at least these are NOS. I used mine straight outa the box, stock grind. https://redirect.viglink.com/?format...52-noscamshaft __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)