Re: Backfiring
Sponsored Links (Register now to hide all advertisements)
Several people use a floor jack to lift the exhaust pipe up to the manifold. This works good but before you fully tighten the clamp, let the jack down and then wiggle the exhaust pipe into proper position as you continue to tighten the clamp. That will cause the exhaust pipe to seat in the proper position. Voice of experience here.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|