The Ford Barn - View Single Post

Doug Linden · 10-31-2024, 08:42 PM

Could be that the cutout is not working. With the engine running put a jumper wire across the two connections on the cutout and check the ammeter to see if it shows a charge.

10-31-2024, 08:42 PM	#7
Doug Linden Senior Member Join Date: May 2010 Location: Massachusetts Posts: 292	Re: Ampmeter not charging Could be that the cutout is not working. With the engine running put a jumper wire across the two connections on the cutout and check the ammeter to see if it shows a charge.